Build your own rack mount solution for Raspberry Pi's!

Any combination of 16 trays/blinds is possible!

Start with the frame and choose yourself how many Pi's you want to mount and combine it with I/O trays and blank covers.

It can fit up to 16 units. Any combination is possible:

• 8x Raspberry Pi, 4x I/O tray and 4x blank cover
• 10x Raspberry Pi, 2x I/O tray and 4x blank cover
• 12x Raspberry Pi and 4x blank cover
• 14x Raspberry Pi and 2x I/O tray
• Choose yourself...

The PoE HAT Mounting kit can also be ordered per tray/Raspberry Pi.

The screws to secure the Pi to the tray are included. Extra (spare) Fast-Click buttons are also included.

Each Raspberry Pi can be individually removed from the rack mount from the front, while the rest remains in place. Quickly and easily with two handy fast-click buttons. No tools are needed!

So changing the SD card is no longer a problem! Simply slide out the RB Pi at the front and voilà: SD card is easily accessible.

Excellent for building a Raspberry Pi Kubernetes cluster

Suitable for the following models:

• RASPBERRY PI 4 MODEL B
• RASPBERRY PI 3 MODEL B+
• RASPBERRY PI 3 MODEL B
• RASPBERRY PI 2 MODEL B
• RASPBERRY PI 1 MODEL B+

There is enough space for the Raspberry Pi POE HAT and the PoE+ HAT

In height, you cannot place connectors on the side of the board (Audio/HDMI/USB-C), which protrudes so high above the board that it no longer fits within 2U. However, if you have space in the rack above this 2U, you can use the HDMI connectors and USB-C connector, but the tray is no longer 'hot-pluggable'. If that's a problem, you'd better choose the 3U rackmount.

Maten/gewicht

• Depth: 33 mm
• Width: 48,3 cm (19”)
• Height: 88,5 mm (fits 2U - 3,5”)
• Weight: 510 gram (fully equipped with 16 trays)